How to Improve Solar Panel Performance for Optimal Energy Output
How to Improve Solar Panel Performance for Optimal Energy Output
The rooftop solar markets are expanding rapidly in India. On the back of government incentives and reducing solar prices, the number of installations is expected to go up significantly in the coming years in the light of the national goal of 40,000 MW by 2022. A number of solar vendors are marketing solar panels to the roof owners with the promise that solar panels will last for more than 25 years. Yes, the life of panels is quite long, of course, but there is a certain performance degradation observed in the generation from solar panels. Hence reducing solar panel performance.
Degradation in Solar Panel Performance
The degradation in solar panel performance varies typically with the material of the panel as well as depending on the weather conditions in which they operate. The generation degradation is observed much more in the Thin Film technology vis-à-vis that in the Crystalline Silicon technology.
In India, the solar photovoltaic markets are dominated by Crystalline Silicon technology. Over the life of a panel of 25 years, these panels can see a degradation of 4- 5% in its output. This degradation would be higher and could be double for the Thin Film panels. As per the lab tests in Indian conditions, the Crystalline Silicon panels tend to have higher degradation in initial 4-5 years than that in the later years. The PV installations also have higher degradation in high humidity conditions and also witness some wear and tear due to various reasons. For example, it is slightly higher in Rajasthan.
It may be required to replace, say, 5% of the total panels which are especially nearer to high voltage side in the beginning of the array. Therefore, some capital expenditure, say, upto 5% of the CAPEX for panels may have to be incurred on retrofitting at the end of about 10 years post- installation.
Suggested Articles

Improve Your Power Factor After Solar Installation: Complete Guide
Power factor after solar installation often fluctuates due to system design and load patterns. Learn the key causes, challenges, and solutions for better efficiency.

Fire Hazard in a Solar Setup at Rice Mill, Kaithal – Case Study and Safety Insights
A recent fire incident at a rice mill in Kaithal highlights the critical importance of safety in solar installations. This case study analyzes the root causes, system faults, and preventive actions that can help industries avoid similar hazards in their solar setups.

Solar Industry Faces Growing Losses from Underperforming Equipment
According to the Raptor Maps’ Global Solar Report, the amount of power loss due to equipment anomalies has nearly doubled from 1.61% in 2019 to 3.13% in 2022. This trend is expected to continue, with anomaly-driven power loss potentially growing to almost 6% by 2025.

How to Safely Install Solar Panels on Metal and Asbestos Rooftops
Discover how solar systems can be installed on metal sheds and asbestos roofs, making factories more energy-efficient and sustainable

Solar Projects Challenges in India: Module Supply Shortages and Policy Delays Slow Growth
India’s utility-scale solar projects face delays due to module supply shortages and policy challenges, impacting the growth of renewable energy.

Solar Power Park Scheme: Central Government Expands Clean Energy Initiative
The Union government plans to launch the second phase of a dedicated program to develop solar parks across the country that will aim to plug loopholes and overcome slow progress.

How to Choose Solar Panel Mounting Structures for Home, Industry & Commercial Installations
Choosing the right mounting structure is crucial for solar panel efficiency and durability. This blog explains various types of mounting structures for residential, industrial, and commercial solar installations, including rooftop, ground-mounted, and hybrid systems, to help you make an informed decision.

Go Off-Grid with Solar Energy: A Complete Guide
Living off-grid, more commonly defined as not having a dependence on public utilities such as electricity, sounds appealing for a lot of reasons. The idea of being self-sufficient, powering your own home with solar energy, and maybe even building that home with your own two hands can sound like a dream and a challenge for people who wish to live life on their terms.

How Are Solar PV Modules Made? Complete Guide to the Manufacturing Process
Choosing the right solar panels can be confusing with so many options in the market. This guide simplifies solar panel selection by comparing types, efficiency ratings, and cost factors. Whether for your home, business, or industry, learn how to make an informed decision and maximize the return on your solar investment.

Law Change Makes It Hard to Receive Compensation for Solar Developers
A recent law change creates hurdles for solar developers seeking compensation, impacting project viability.