How to Maintain Solar Power System for Homes, Industries & Commercial Buildings
How to Maintain Solar Power System for Homes, Industries & Commercial Buildings
Maintenance Of Solar System
Getting a solar system, for generating solar energy for home/industrial/commercial roof top or ground mounted, is only a small part of the effort. The key is in maintaining the performance of the solar system month on month basis. According to estimates, regular maintenance of solar system can increase the performance by 30% of the solar system installed over your roof or on the ground.
Preventive maintenance techniques can help to provide higher unit generation from your solar system. Few of the simple techniques are discussed below.
Periodic Cleaning of Panels:
Monthly cleaning of solar panels is the most basic technique to get higher generation from solar system. Air in Delhi and national capital region (NCR) especially remains highly polluted with suspended dust particles which gets deposited over the panel. Pigeons and other birds also dirty the panels which can significantly reduce the generation. Few ways to do it are as follows.
- Clean the panels with water from a garden hose. But don’t put cold water on the hot panels as it may damage the panels.
- Use a soft sponge with soapy water if the cleaning required is more.
- If it is difficult to reach the panels due to height and other physical barriers, better to call a professional agency to clean the panels.
- Use Pigeon Guards: Install the pigeon guards at the top of the solar panels to discourage the birds sit on the top. It has been an effective way to reduce the pigeon poop getting deposited on your solar panels.
Suggested Articles

Solar Inverter Installation: On-Grid, Off-Grid & Hybrid
A complete guide to on-grid, off-grid, and hybrid solar inverter installation, including setup, wiring, and best practices for safe operation.

How to Read the Electricity Bill Before Deciding Solar Plant Capacity
Load assessment is an essential step before installing a solar PV system. It helps determine electricity consumption and ensures accurate system sizing for optimal solar performance.

Inverter Circuit Board Fault Guide for Solar PV Systems
A complete guide to identifying inverter circuit board faults in solar PV systems, recognizing when professional service is required, and following safe maintenance procedures.

Solar Chankya: Complete Guide to Solar Systems and Components
Discover the key components of solar systems—from panels to inverters and batteries—and how they work together for efficient energy solutions

Solar PV Maximum Working Voltage: Limits & Design Guide
A complete guide to maximum working voltage in solar PV systems, covering limits, calculations, and key design considerations.

Standalone Solar PV System Startup Guide
A complete guide to identifying, recording, and repairing anomalous conditions in solar PV systems to improve reliability, performance, and safety.

How Solar Energy Generation Is Calculated: A Simple Step-by-Step Guide
Understanding how solar energy generation is calculated helps estimate system output, savings, and ROI. This step-by-step guide explains the formula, key factors, and real-world examples to make solar energy calculation simple and practical.

Workplace Safety Violations in Solar PV Projects
A complete guide to establishing and following safe work procedures in solar PV systems, ensuring worker safety during installation, testing, commissioning, operation, and maintenance.