How to Maintain Solar Power System for Homes, Industries & Commercial Buildings
How to Maintain Solar Power System for Homes, Industries & Commercial Buildings
Maintenance Of Solar System
Getting a solar system, for generating solar energy for home/industrial/commercial roof top or ground mounted, is only a small part of the effort. The key is in maintaining the performance of the solar system month on month basis. According to estimates, regular maintenance of solar system can increase the performance by 30% of the solar system installed over your roof or on the ground.
Preventive maintenance techniques can help to provide higher unit generation from your solar system. Few of the simple techniques are discussed below.
Periodic Cleaning of Panels:
Monthly cleaning of solar panels is the most basic technique to get higher generation from solar system. Air in Delhi and national capital region (NCR) especially remains highly polluted with suspended dust particles which gets deposited over the panel. Pigeons and other birds also dirty the panels which can significantly reduce the generation. Few ways to do it are as follows.
- Clean the panels with water from a garden hose. But don’t put cold water on the hot panels as it may damage the panels.
- Use a soft sponge with soapy water if the cleaning required is more.
- If it is difficult to reach the panels due to height and other physical barriers, better to call a professional agency to clean the panels.
- Use Pigeon Guards: Install the pigeon guards at the top of the solar panels to discourage the birds sit on the top. It has been an effective way to reduce the pigeon poop getting deposited on your solar panels.
Suggested Articles

Ground Mounted Solar Systems: Complete Guide for Commercial & Industrial Projects in India
Ground mounted solar systems are ideal for commercial and industrial projects with available land. This guide explains cost, land requirement, installation process, and ROI in India.

Battery Bank Stand & Spill Containment Installation Guide
A complete guide to battery bank stand installation and spill containment, covering setup, safety, and best practices for solar projects.

Solar PV AC or DC: How Solar Electricity Is Generated
Total solar PV power represents the combined power output of a solar photovoltaic system. This guide explains its meaning, calculation, and how it directly impacts solar performance, efficiency, and long-term energy generation.

How to Prepare a Bill of Material (BOM) for Solar PV Systems: Step-by-Step Installer Guide
Learn how to prepare a detailed Bill of Material (BOM) for solar PV systems using design documents like SLDs and layouts. This step-by-step guide helps installers ensure accurate material planning, reduce errors, and improve project execution.

Sustainable Solar Panel Disposal: Recycling for a Greener Future
Sustainable solar panel disposal ensures old or damaged panels are recycled responsibly, reducing waste and environmental harm. By adopting eco-friendly recycling and reuse practices, we can recover valuable materials, lower carbon impact, and make solar energy truly sustainable from installation to end-of-life.

Best Solar Panels for Rooftop Projects: How to Choose the Right One
Selecting the right solar panel is crucial for rooftop project success. This guide explains how to evaluate panel types, efficiency, warranties, and performance to ensure maximum power output and long-term savings for your home or business.

Blame it on Sun! Average Solar PLFs not satisfactory
Explore the reasons behind low average Solar PLFs, from environmental factors to system design, and learn strategies to boost solar plant performance

Developers fear unfair state-specific levies will make solar more expensive
Developers in India are concerned that state-specific levies on solar projects could increase costs, slow adoption, and impact the growth of renewable energy across residential, commercial, and industrial sectors.