How to Improve Energy Efficiency and Save Electricity Costs
How to Improve Energy Efficiency and Save Electricity Costs
With the ever growing temperatures and the persistent humidity, ACs have become a necessity today; as have the room heaters with the chilling temperatures of winters.
And while these make living easier, they do increase the cost of living. The ever increasing electricity rates don’t help the bills either.
There sure are the green methods to lower the electricity bills, for e.g., LED light sources, the energy efficient appliances, and the latest, solar power; and then there are also some easy tricks and minor adjustments in the way we use our appliances which can help cut down the energy costs. These don’t require an immediate big change or investment, and yet help cut down on the costs.
- Air Conditioners: Ensuring properly clean and dust/blockage free vents ensure better cooling n lesser power consumption.
- Washing Machines: Ideally, the machine can be packed with as many clothes as can fit in, but practically, that is not advisable. Especially if the drier has to be used later. The drier seems to work better with about 20-25% lesser load. That ensures better cleaning/drying, and no over-loading of the machine too. As far as possible, washing the clothes in cold water reduces the power requirements. Heating the water in the machine, tends to use the maximum energy. Washing with cold water also has the advantage of lesser probability of colour running off of the clothes.
- Computers and TV set: Always powered on computers, TVs, music systems and phone chargers contribute a lot of unaccounted units in the bills. Ensuring to switch them off when not in use, definitely cuts down at least a small portion of the bill.
- Setting sleep mode and hibernate, to reduce the power consumption during inactive periods, is also a great help.
- Screensavers, as beautiful as they look, unlike the general perception, don’t save energy, instead, they use more. Setting off the monitor after a few minutes of being idle, is a wiser choice with respect to power saving.
- Unplug: Though we don’t realise it, but unplugging the devices that are seldom used, can actually save us a bit.
- Ovens: Peeking inside the oven frequently, lets out the heat, causing more power consumption for the same amount of cooking.
- Dishwashers: By the same logic as washing machine, turning down the heat to minimum required would help save some energy consumption.
Also stacking up the dishwasher efficiently increases the efficiency, and reduces the power consumption for reruns.
Suggested Articles

Electrical Equipment Bonding in Solar PV Systems
A complete guide to electrical equipment bonding in solar PV systems, including anti-oxidant application, compliance requirements, and safety best practices.

Battery Bank Stand & Spill Containment Installation Guide
A complete guide to battery bank stand installation and spill containment, covering setup, safety, and best practices for solar projects.

Installation of DC Combiner Box with Disconnect Protection: Step-by-Step Guide
A DC combiner box is an important protection component in solar PV systems. This guide explains its installation, disconnect protection, wiring, and safety requirements.

Different Types of Solar Photovoltaic Systems: Complete Guide
Earthing and lightning protection are critical safety components in solar PV installations. This guide explains their importance, types, components, and best practices for solar installers.

Short Circuit Current (Isc) Testing Guide for Solar PV
A complete guide to measuring short circuit current (Isc) in solar PV systems, including testing methods, safety guidelines, and performance evaluation for accurate system assessment.

Difference Between Solar Power and Photovoltaic: Explained Simply
Total solar PV power represents the combined power output of a solar photovoltaic system. This guide explains its meaning, calculation, and how it directly impacts solar performance, efficiency, and long-term energy generation.

How to Connect Solar Panels to Battery: Step-by-Step Guide
Connecting solar panels to a battery is essential for storing solar energy and ensuring power availability when sunlight is low. This step-by-step guide explains how to connect solar panels to a battery safely using a charge controller, wiring diagrams, and best practices for beginners and professionals alike.

Single Line Diagram (SLD) in Solar PV Systems: Complete Guide to Design, Symbols & Reading
Learn how to fetch a Bill of Material (BOM) for a solar PV system directly from design documents like SLD, layout, and GA drawings. This step-by-step guide helps installers and EPCs ensure accurate material estimation and efficient project execution.