Affordable Solar Systems and Plants for Small and Medium Enterprises
Affordable Solar Systems and Plants for Small and Medium Enterprises
The industries should opt for rooftop solar today as there are a number of commercial advantages apart from environmental benefits. Industries can opt for solar system size ranging from few KWs to few MWs.
Solar Plants for SMEs
Typically, an on grid solar system is preferable which directly connects to the LT panel of the Discom Meter.
- Power generated from solar will directly reduce the electricity bill.
- Any surplus power generated at any time will be fed back to the Grid and stored with the Discom.
- These solar plants run through Net Metering facility provided by the Discom in which the billing and settlement happens at the end of each month. Any surplus power generated from solar plant will be carried forward to the next month. However, if there is any solar plant left unused at the end of the financial year, it will typically lapse.
- Having said that there are very slim chances that the solar power will lapse as the power generated from solar plant will not be more than 30% of the electricity bill for any industry.
As the solar system directly connects to the LT panel, the solar power gets used to run all the heavy machineries, air conditioners, motor loads etc. No batteries are used in such On-Grid systems which means that the solar system will only run when the Discom power is available.
Subsidies for solar plants for SMEs
There are no subsides available for setting up solar system in industries now which were there till 2016 as the cost of solar was high during that time. However, now the solar prices have become very affordable. For example, for the industries located in and nearby Delhi/National Capital Region (NCR) where the solar radiation levels are good, the pay backs of solar will be typically in 3-4 years.
Hence, many industries located in Okhla, Noida, Gurgaon, Faridbad, Ghaziabad, Kundali, Manesar, Neemrana, Palwal, Bawal, Bahadurgarh etc have opted for the rooftop solar plants.
Also, the Accelerated Depreciation (AD) benefit is available for installing solar plants. Factories can depreciate 40% of the solar plant capital cost in the 1st year itself. So, for a company paying 34% income tax, the cost of solar plant reduces by 13.6% in the very first year itself. 40% AD is available on the reducing balance in the next subsequent years.
Suggested Articles

How to Inspect and Maintain Solar Arrays
A complete guide to solar array inspection and maintenance, helping improve system reliability, energy output, and long-term performance through routine inspections and preventive care.

Grounding Conductor Sizing for Solar PV Systems
A complete guide to determining grounding conductor size for solar PV systems, ensuring safe, compliant, and reliable installations.

Solar Panel Installation on Tiled Roofs: Complete Homeowner Guide
When you’re ready to install solar panels on your home, there are many factors that will determine the unique design and cost of your solar system. Various roof types require different processes for installation. For example, lightweight tile roofs can present unique challenges and considerations for a solar installer. Here are a few things you need to know before adding solar energy to your tile roof.

How to Test PV Module Electrical Output: Step-by-Step Guide
A step-by-step guide to PV module electrical output testing, covering voltage, current measurement, and best practices for accurate performance evaluation.

Installation of DC Energy Meters in Solar PV Systems: Step-by-Step Guide
DC energy meters are used in solar PV systems to measure generated DC power and energy. This guide explains installation, wiring, testing, and safety procedures for solar installers.

UP Electricity Tariff Increase 2015-16: Rates Rise by Rs 0.40–1.00 per Unit – What Consumers need to know
Uttar Pradesh has increased electricity tariffs for 2015-16, ranging from Rs 0.40 to 1.00 per unit. This update explains the revised rates, the sectors affected, and what consumers need to know about the tariff hike.

How to Calculate PV Power Output? Step-by-Step Guide
Calculating PV power output helps you estimate how much electricity a solar system can generate. This step-by-step guide explains the PV power output formula, examples, and key factors affecting solar energy production.

Delhi charges one of the highest tariffs for commercial load and industrial – average over Rs 10.00 per kWh
Delhi imposes some of the highest electricity tariffs for commercial and industrial consumers, averaging over ₹10 per kWh, impacting businesses and operating costs