How to Maintain Solar Power System for Homes, Industries & Commercial Buildings
How to Maintain Solar Power System for Homes, Industries & Commercial Buildings
Maintenance Of Solar System
Getting a solar system, for generating solar energy for home/industrial/commercial roof top or ground mounted, is only a small part of the effort. The key is in maintaining the performance of the solar system month on month basis. According to estimates, regular maintenance of solar system can increase the performance by 30% of the solar system installed over your roof or on the ground.
Preventive maintenance techniques can help to provide higher unit generation from your solar system. Few of the simple techniques are discussed below.
Periodic Cleaning of Panels:
Monthly cleaning of solar panels is the most basic technique to get higher generation from solar system. Air in Delhi and national capital region (NCR) especially remains highly polluted with suspended dust particles which gets deposited over the panel. Pigeons and other birds also dirty the panels which can significantly reduce the generation. Few ways to do it are as follows.
- Clean the panels with water from a garden hose. But don’t put cold water on the hot panels as it may damage the panels.
- Use a soft sponge with soapy water if the cleaning required is more.
- If it is difficult to reach the panels due to height and other physical barriers, better to call a professional agency to clean the panels.
- Use Pigeon Guards: Install the pigeon guards at the top of the solar panels to discourage the birds sit on the top. It has been an effective way to reduce the pigeon poop getting deposited on your solar panels.
Suggested Articles

Sir! Solar Mein Itna Chalta Hai!” When to Reject a Site: The Truth About Shadow Analysis
Discover the importance of solar site assessment and shadow analysis to optimize rooftop solar performance, prevent shading losses, and maximize energy generation.

How Azimuth Angle Impacts Solar Panel Efficiency for Homes, Industries, and Commercial Buildings
Discover how solar panel azimuth impacts energy generation in homes, industries, and commercial buildings. Maximize efficiency with correct orientation.

Inspection Reporting and Corrective Actions in Solar PV Projects Duplicated
A complete guide to preparing solar PV inspection reports and implementing corrective actions to ensure quality, compliance, and project performance.

Poor vs Good Solar Installation: Key Differences Explained
A solar system’s performance depends heavily on installation quality. This blog explains the clear differences between a poor and good solar installation — from wiring practices and panel alignment to mounting structures and system safety — helping you make an informed choice and ensure long-term efficiency.

Solar Chankya: Complete Guide to Solar Systems and Components
Discover the key components of solar systems—from panels to inverters and batteries—and how they work together for efficient energy solutions

1 MW Solar Power Plant Cost in Madhya Pradesh | A Complete Industrial Solar Guide
A detailed guide on the cost of setting up a 1 MW solar power plant in Madhya Pradesh. Learn about pricing, EPC components, land requirements, subsidies, and expected payback for commercial and industrial users.

Solar Inverter Specifications Explained: How to Read Datasheets & Choose the Right Inverter
Choosing the right solar inverter is critical for system performance and safety. This guide explains how to read inverter datasheets, understand key specifications, and select the best inverter for your solar project.

Solar Cable Guide | Types, Sizing & Specifications for PV Systems
Solar cables play a critical role in ensuring efficient and safe power transmission in PV systems. This guide explains cable types, specifications, sizing methods, and best practices for selecting the right solar cables.