How to Maintain Solar Power System for Homes, Industries & Commercial Buildings
How to Maintain Solar Power System for Homes, Industries & Commercial Buildings
Maintenance Of Solar System
Getting a solar system, for generating solar energy for home/industrial/commercial roof top or ground mounted, is only a small part of the effort. The key is in maintaining the performance of the solar system month on month basis. According to estimates, regular maintenance of solar system can increase the performance by 30% of the solar system installed over your roof or on the ground.
Preventive maintenance techniques can help to provide higher unit generation from your solar system. Few of the simple techniques are discussed below.
Periodic Cleaning of Panels:
Monthly cleaning of solar panels is the most basic technique to get higher generation from solar system. Air in Delhi and national capital region (NCR) especially remains highly polluted with suspended dust particles which gets deposited over the panel. Pigeons and other birds also dirty the panels which can significantly reduce the generation. Few ways to do it are as follows.
- Clean the panels with water from a garden hose. But don’t put cold water on the hot panels as it may damage the panels.
- Use a soft sponge with soapy water if the cleaning required is more.
- If it is difficult to reach the panels due to height and other physical barriers, better to call a professional agency to clean the panels.
- Use Pigeon Guards: Install the pigeon guards at the top of the solar panels to discourage the birds sit on the top. It has been an effective way to reduce the pigeon poop getting deposited on your solar panels.
Suggested Articles

How to Check Equipment Location for Solar PV Systems
A complete guide to battery bank enclosure and rack installation, including site verification, setup procedures, and safety practices for solar PV systems.

Solar Inverter Installation: On-Grid, Off-Grid & Hybrid
A complete guide to on-grid, off-grid, and hybrid solar inverter installation, including setup, wiring, and best practices for safe operation.

Are Colleges and Schools ready to take up Solar challenge?
Adopting solar energy can help schools and colleges reduce electricity costs and promote sustainability. This guide explores how educational institutions can implement rooftop solar projects, the benefits, and what steps are needed to take on the solar challenge effectively.

Single Line Diagram (SLD) in Solar PV Systems: Complete Guide to Design, Symbols & Reading
Learn how to fetch a Bill of Material (BOM) for a solar PV system directly from design documents like SLD, layout, and GA drawings. This step-by-step guide helps installers and EPCs ensure accurate material estimation and efficient project execution.

Solar Panel Specifications Explained: How to Read Datasheets & Choose the Right PV Module
Choosing the right solar panel requires a clear understanding of technical specifications. This guide explains how to read solar panel datasheets, interpret key parameters, and select the best PV module for your project.

Battery Bank Installation in Solar Projects: Site Selection & Best Practices
Battery banks are essential for energy storage in solar projects. This guide explains site selection, installation procedures, safety measures, and best practices for solar battery systems.

Flat Roof Solar Installation Guide: Design, Mounting Systems & Best Practices
A practical guide to flat roof solar installation covering key design considerations, mounting system types, and best practices for efficient and reliable performance.

Solar PV Module Damage Inspection & Quality Checks in Solar EPC
A practical solar panel unpacking guide covering safe handling, on-site precautions, and key do’s and don’ts to avoid module damage.