Haryana Electricity Tariff Hike Impacts All Consumer Categories in 2015-16
Haryana Electricity Tariff Hike Impacts All Consumer Categories in 2015-16
Haryana Electricity Regulatory Commission has finalized the tariff for the year 2015-16 as per its order dated 7th May 2015.
Haryana Electricity Tariff for Domestic Consumers
Haryana Electricity Tariff for the domestic consumers consuming more than 500 units are going to see a substantial hike in the tariff. The energy charges for these domestic consumers are increased from Rs 5.98 per kWh to Rs 6.74 per kWh – a 12.9% year to year increase. The FSA, Electricity Duty and the Municipal tax would be over and above this tariff. In effect, these domestic consumers will pay Rs 8.17 per kWh as the variable tariff.
The table below shows the tariff to be paid by domestic categories.
| Energy Charges (Rs per kWh) | FSA (Rs per kWh) | Electricity Duty (Rs per kWh) | Municipal Tax | Variable Charges (Rs per kWh) | |
| Domestic (>500 Units) for a 10 KW connected load | 6.75 | 1.27 | 0.10 | 0.05 | 8.17 |
| Bulk Supply (Domestic) (70 kW and above at 11 kV or above voltage) # | |||||
| Monthly consumption not exceeding 500 units/ flat | 4.70 | 1.15 | 0.10 | 0.05 | 6.00 |
| Monthly consumption exceeding 500 units/flat/ DU. | 5.85 | 1.15 | 0.10 | 0.05 | 7.15 |
# Demand charges are also applicable.
The bulk supply tariff for domestic consumer category is also in excess of Rs 8.00 per kWh after adding the applicable demand charges. This category of consumer includes the large residential condominiums.
Haryana Electricity Tariff for Commercial Consumers
As shown below, the Non Domestic or commercial consumers will also pay a tariff of more than Rs 8.10 per kWh in case they have a load between 5 KW and 20 KW. Their tariff is slightly lower than the tariff of domestic consumers. This category includes shops, Malls, Hotels, Hospitals etc.
| Energy Charges (Rs per kWh) | FSA (Rs per kWh) | Electricity Duty (Rs per kWh) | Municipal Tax | Variable Charges (Rs per kWh) | |
| Non Domestic | |||||
| Upto 5 kW (LT) | 6.05 | 1.19 | 0.10 | 0.05 | 7.39 |
| Above 5 kW and Up to 20 kW (LT) | 6.75 | 1.20 | 0.10 | 0.05 | 8.10 |
| Above 20 kW upto 50 kW (LT) | 6.15 | 1.27 | 0.10 | 0.05 | 7.57 |
| Existing consumers above 50 kW upto 70 kW (LT) | 6.50 | 1.29 | 0.10 | 0.05 | 7.94 |
| Consumers above 50 kW (HT) | 6.30 | 1.21 | 0.10 | 0.05 | 7.66 |
Many categories in HT and Bulk supply segment would have a variable tariff of more than Rs 8.00 per kWh apart from paying a fixed demand charges. Overall the tariffs for these categories can go in excess on Rs 10 per kWh.
| Energy Charges (Rs per kWh) | FSA (Rs per kWh) | Electricity Duty (Rs per kWh) | Municipal Tax | Variable Charges (Rs per kWh) | |
| HT Industry (above 50 kW)* | |||||
| Supply at 11 KV | 6.83 | 1.24 | 0.10 | 0.05 | 8.22 |
| Supply at 33 KV | 6.72 | 1.24 | 0.10 | 0.05 | 8.11 |
| Supply at 66 kV or 132 kV | 6.61 | 1.24 | 0.10 | 0.05 | 8.00 |
| Arc furnaces/ Steel Rolling Mills | 6.79 | 1.24 | 0.10 | 0.05 | 8.18 |
| Bulk Supply* | |||||
| Supply at LT | 6.78 | 1.25 | 0.10 | 0.05 | 8.18 |
| Supply at 11 kV | 6.67 | 1.25 | 0.10 | 0.05 | 8.07 |
| Supply at 33 kV | 6.56 | 1.25 | 0.10 | 0.05 | 7.96 |
| Supply at 66 or 132 kV | 6.44 | 1.25 | 0.10 | 0.05 | 7.84 |
| Supply at 220 kV | 6.39 | 1.25 | 0.10 | 0.05 | 7.79 |
*A PF of 0.9 is considered to convert the tariffs to per kWh basis. For Arc furnaces, a PF of 0.95 is used. These categories also have to pay the demand charges.
Suggested Articles

Blame it on Sun! Average Solar PLFs not satisfactory
Explore the reasons behind low average Solar PLFs, from environmental factors to system design, and learn strategies to boost solar plant performance

Solar for Cold Storage Units: Cost, Benefits, Installation & ROI in India
A complete guide on solar systems for the FMCG industry in India covering installation cost, benefits, ROI, system sizing, and the installation process.

Case Study: Successful Design, Installation, and Commissioning of a 50 kWp Rooftop Solar PV Plant
This case study details our experience in designing, installing, and commissioning a 50 kWp solar PV rooftop power plant. Learn how we overcame technical challenges, optimized system performance, and delivered clean, reliable energy. Discover insights on panel selection, inverter sizing, monitoring, and commissioning processes that ensured maximum efficiency and long-term performance for the rooftop solar installation.

Poor vs Good Solar Installation: Key Differences Explained
A solar system’s performance depends heavily on installation quality. This blog explains the clear differences between a poor and good solar installation — from wiring practices and panel alignment to mounting structures and system safety — helping you make an informed choice and ensure long-term efficiency.

Solar Panel Efficiency and Temperature: What You Need to Know
The stronger the sun, the higher the temperature and more energy your solar panels produce, right? No.

Battery Bank Enclosure & Rack Installation Guide
A complete guide to battery bank enclosure and rack installation, including site verification, setup procedures, and safety practices for solar PV systems.

Stop Losing Power: The Ultimate Guide to Solar DC & AC Cable Sizing for Max Efficiency
DC and AC cabling are the lifelines of any Solar PV Rooftop System. Learn how proper cable selection, connection design, and installation can help achieve optimum power output and long-term safety.

How DISCOMs Implement Net Metering for Solar Power Plants
Discover the process of net metering implementation by DISCOMs for solar power plants. Understand the benefits, billing mechanism, and how it maximizes solar energy utilization.

How to Calculate Savings from Rooftop Solar Solutions: A Complete Guide
Calculating savings from rooftop solar solutions is essential for planning your investment. This guide explains how to estimate cost reduction, return on investment, and long-term financial benefits for residential, commercial, and industrial solar projects.

Steps Required for Conducting a Site Assessment Prior to Solar Installation
A solar site assessment helps installers evaluate location, shading, structure, and energy requirements before installation. This guide explains the essential steps for accurate solar system planning.